Error Messages - Alpine NVD-A101 SMART MAP PRO Owner's Manual

Error messages

Various messages are displayed on the screen during operation. In addition to the messages
telling you the current status or providing guidance for the next maneuver, the following error
messages may appear. If one of these error messages is displayed, carefully follow the instructions
in the solution column.
Message
Please insert
DVD-ROM/map
data disk.
DVD ROM
unreadable.
Please check
DVD ROM.
DVD ROM being
checked.
Menu
inoperable while
driving. Please
bring vehicle to
stop at safe
place and
engage the
parking brake
before using,
this function.
78
Cause
• The disc has been removed.
• There was no disc in the system
when the power was switched on.
• A disc that the system cannot read
has been loaded.
• The disc is dirty or upside down.
• The disc cannot be read because of
condensation.
• A disc was just inserted.
• Vibration or the like made it
impossible to read the disc.
• The MENU button was pressed
while the vehicle was running.
• A menu selection operation was
carried out while the vehicle was
running.
• An attempt was made to search the
map from home with no home
registered.
• An attempt was made to search the
map from a memory point with no
memory point registered.
• An attempt was made to search the
map from the Departure point with
no destination registered.
• All-route display, all-route search, or
route deletion was attempted with
no destination registered.
• An attempt was made to indicate a
waypoint with no destination
registered.
• An attempt was made to register
more than 99 points in memory.
Solution
Insert the disc.
Insert the map disc.
Take out the disc, check if it was
upside down, clean it if necessary,
then re-insert it.
Take out the disc, allow enough time
for condensation to evaporate (about
1 hour), then re-insert the disc.
When the disc check is complete, the
following screen is displayed
automatically.
Move the vehicle to a safe location,
stop, and engage the parking brake,
then carry out this operation.
Register your home, then search the
map.
Register a memory point, then
search the map.
Specify the destination, then carry
out the search.
Specify the destination, then carry
out the operation.
Specify the destination, then specify
the waypoint.
Erase unnecessary points, then
register.