Settings After Installation - Sony PDWHR1 Installation Manual

1-4. Settings after Installation
Check procedure
1. While press the [HOME] button and the [SHIFT]
button simultaneously, press the [MENU] button.
The MAINTENANCE MENU is displayed.
MAINTENANCE MENU
M0:CHECK
M1:ADJUST
M2:SERVICE SUPPORT
M3:OTHERS
M4:SETUP MAINTENANCE
M5:NETWORK
M6:DRIVE
2. Rotate the [PUSH|SET] knob to select M2: SERVICE
SUPPORT, and press the [PUSH|SET] knob.
3. Rotate the [PUSH|SET] knob to select M22: OPTION
STATUS, and press the [PUSH|SET] knob.
4. Confirm that "ena" is displayed in the place corre-
sponding to PDBK-MK1.
OPTION STATUS
MPEG TS Board
PDBK-MK1
TO MENU : MENU KEY
n
For more detailed information on the Maintenance Mode,
refer to the PDW-HR1 Operation Manual or the Mainte-
nance Manual Volume 1.
1-6 (E)
: ena
: ena
PDBK-MK1