Section 1 Installation; Overview Of Installation; Specifications - Sony PDWHR1 Installation Manual

Purpose of this manual
This manual is the installation manual of the SxS Memory
Card Adaptor PDBK-MK1.
This manual is intended for use by trained system and
service engineers, and describes the information on install-
ing the PDBK-MK1.
Related manual
Besides this Installation Manual, the following manual is
prepared for PDBK-MK1.
. Maintenance Manual (Available on request)
This manual described the detailed maintenance informa-
tion and repair information required for parts-level
service.
For obtaining, contact your local Sony Sales Office/
Service Center.

1-1. Specifications

General
Outside dimensions (width/height)
MK1 assembly: 216.2 x 235.5 mm
Mass MK1 assembly: Approximately 260 g
+12 V dc: 1 A
Power supplies
Power consumption Approximately 12 W
PDBK-MK1
Section 1
Installation
1-2. Overview of Installation
Components
The SxS Memory Card Adaptor PDBK-MK1 consists of
the following parts.
. MK1 assembly
. Slot cover sub assembly
. Coaxial cable
. Harness (IF-DPR)
. Harness cover
. Harness clamp (2)
. Installation Manual
. Operation Manual
. CD-ROM
. Attaching screws
+B3 x 6 (2)
+PSW2.6 x 6 (8)
+B2.6 x 3 (4)
Applicable model
PDW-HR1
Installation of PDBK-MK1
Install the PDBK-MK1 according to the installation proce-
dure described in Section 1-3. Upon completion of installa-
tion, check that the PDBK-MK1 is properly installed
according to the check procedure described in Section 1-4.
1-1 (E)