Installation Procedure - Sony PDWHR1 Installation Manual

1-3. Installation Procedure
1. Remove the eight screws and remove the rear panel
assembly in the arrow direction.
2. Remove the two screws.
3. Insert the ends of two flat-blade screwdrivers (small)
into the cutout portions as shown in the figure, and turn
them in the arrow A direction to draw out the VPR-15
board.
4. Remove the VPR-15 board in the arrow B direction.

VPR-15 board
PS2.6 x 5
1-2 (E)
Rear panel assembly
B3 x 6
B3 x 6
Cutout portion
Flat-blade screwdriver
(small)
PS2.6 x 5

Flat-blade screwdrivers
(small)
5. Remove the two screws.
6. Insert the ends of two flat-blade screwdrivers (small)
into the cutout portions as shown in the figure, and turn
them in the arrow A direction to draw out the NET-5
board.
7. Remove the NET-5 board in the arrow B direction.
PS2.6 x 5
Cutout portion

Flat-blade screwdriver
(small)

PS2.6 x 5
NET-5 board
Flat-blade screwdrivers
(small)
PDBK-MK1