4 Replacement Procedures
4.27 Camera module
4.27 Camera module
Removing the Camera module
To remove the camera module, follow the steps below and refer to Figure 4-40.
1. Take out the camera module from the slot and disconnect the camera harness from
the connector on the camera module.
NOTE: Do not reuse the removed camera module. Be sure to use a new camera module.
Camera module
Camera harness
Figure 4-40 Removing the camera module
4-70
[CONFIDENTIAL]
PORTÉGÉ A600 Maintenance Manual (960-710)
Downloaded from
www.Manualslib.com
manuals search engine