Table of Contents
Advertisement
5-6
Boot Option Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the legacy drive(s) specified is not bootable.
Boot Priority Order
Boot Option #1/#2/#3/#4
Press [Enter] to configure the boot priority.
By default, the server searches for boot devices in the following secquence:
1.
UEFI device.
2.
Hard drive.
3.
Network device.
4.
USB device.
Network Device BBS Priorities
Press Enter to configure the boot priority.
Hard Drive BBS Priorities
Press [Enter] for advanced configuration.
Bootup Configuration
Bootup NumLock State
Enable or Disable Bootup NumLock function.
Options available: On/Off. Default setting is On.
- 75 -
BIOS Setup
Advertisement
Table of Contents
