Table of Contents
Advertisement
2-6
Boot Option Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the legacy drive(s) specified is not bootable.
Boot Priority Order
Boot Option #1/#2/#3
Press Enter to configure the boot priority.
By default, the server searches for boot devices in the following secquence:
1.
UEFI device.
2.
Hard drive.
3.
Network device.
Hard Drive BBS Priorities
Press Enter to configure the boot priority.
Boot Configuration
Bootup NumLock State
Enable or Disable Bootup NumLock function.
Options available: On/Off. Default setting is On.
Quiet Boot
Enables or disables showing the logo during POST.
Options available: Enabled/Disabled. Default setting is Disabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When enabled, this BIOS fea-
ture allows the ROM BIOS of those host adaptors to "capture" Interrupt 19 during the boot process so
that drives attached to these adaptors can function as bootable disks.
Options available: Enabled/Disabled. Default setting is Enabled.
- 67 -
BIOS Setup
Advertisement
Table of Contents
