Table of Contents
Advertisement
2-6
Boot Option Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the legacy drive(s) specified is not bootable.
Boot Priority Order
Boot Option
Press Enter to configure the boot priority.
By default, the server searches for boot devices in the following secquence:
1.
UEFI device.
2.
Hard drive.
3.
Network device.
Bootup Configuration
Bootup NumLock State
Enable or Disable Bootup NumLock function.
Options available: On/Off. Default setting is On.
Quiet Boot
Enables or disables showing the logo during POST.
Options available: Enabled/Disabled. Default setting is Disabled.
Option ROM Message
Set display mode for option ROM..
Options available: Force BIOS/Keep Current. Default setting is Force BIOS.
- 81 -
BIOS Setup
Advertisement
Table of Contents
