Connecting To A Computer - Sony VPL-HW40ES Operating Instructions Manual

Connecting to a Computer

Right side of the projector
HD-Dsub15 pin cable (not supplied) or HDMI cable (not supplied)
: Video signal flow
Notes
• Use a high-speed HDMI cable. With a standard HDMI cable, images of 1080p, DeepColor, and
3D video images may not be displayed properly.
• When connecting an HDMI cable to the projector, make sure the
HDMI input of the projector and the
position.
• If you set your computer, such as a notebook type, to output the signal to both computer's display
and this equipment, the picture of the equipment may not appear properly. Set your computer to
output the signal to only the external monitor.
For details, refer to the computer's operating instructions supplied with your computer. For
settings of the computer, consult with the manufacturer of the computer.
• If the picture from equipment connected to the projector with an HDMI cable is not clear, check
the settings of the connected equipment.
When using an HDMI cable, be sure to use a Sony HDMI
cable or another cable that has the HDMI logo.
v
mark on the connector of the cable is set at the same
Computer
to monitor output
V
mark on the upper part of the
15