Connecting The Computer Via The Rs-232C - Sony SRX-T423 Operating Instructions Manual

Ethernet cable (cross cable)
(supplied)
Ethernet connector
CAUTION
For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
ATTENTION
Par mesure de sécurité, ne raccordez pas le connecteur
pour le câblage de périphériques pouvant avoir une tension
excessive à ce port. Suivez les instructions pour ce port.
VORSICHT
Aus Sicherheitsgründen nicht mit einem Peripheriegerät-
Anschluss verbinden, der zu starke Spannung für diese
Buchse haben könnte. Folgen Sie den Anweisungen für
diese Buchse.
Note
If the power of the projector remains on for a long period
of time without the ethernet cable connected, the message
"Sony Data Projector Initializing..." may appear in the
STATUS MESSAGE window while you are setting up for
networking after connecting the ethernet cable. This is not
a malfunction of the projector.
Computer for controlling
the projector
Connecting the Computer via the
RS-232C
RS-232C connector
Connecting cable (not supplied)
RS-232C connector
Connecting a Computer for Controlling the Projector
Computer for controlling
the projector
51