When Data Cannot Be Sent Due To A Problem With The Destination - Ricoh Pro 8100s User Manual

Messages
"Updating the destination list...
Please wait. Specified
destination(s) or sender's name
has been cleared."
"Updating the destination list...
Please wait. Specified
destination(s) or sender's name
has been cleared."

When Data Cannot Be Sent Due to a Problem with the Destination

Messages
"Some invalid destination(s)
contained. Do you want to
select only valid destination(s)?"
"SMTP authentication E-mail
address and Administrator E-
mail address mismatch."
Causes
The destination list is being
updated from the network using
Web Image Monitor.
A specified destination or
sender's name was cleared
when the destination list in the
delivery server was updated.
Causes
The specified group contains e-
mail destinations and/or folder
destinations, either of which are
incompatible with the specified
transmission method.
The SMTP authentication e-mail
address and the administrator's
e-mail address do not match.
When Other Messages Appear
Solutions
Wait until the message
disappears. Do not turn off the
power while this message is
displayed. Depending on the
number of destinations to be
updated, there may be some
delay before you can resume
operation. Operation is not
possible while this message is
displayed.
Specify the destination or
sender's name again.
Solutions
In the message that appears at
each transmission, press
[Select].
For details about how to set
SMTP authentication, see "File
Transfer", Connecting the
Machine/ System Settings .
211