When You Have Problems Operating The Machine - Ricoh Pro 8100s User Manual

9. Troubleshooting
When You Have Problems Operating the
Machine
Problems
The machine does not turn on.
When the machine is turned on,
the only icon that appears on
the home screen is the [Copier]
icon.
The machine has just been
turned on and the User Tools
screen is displayed, but the User
Tools menu has items missing.
The indicator lamp remains lit
and the machine does not enter
Sleep mode even though the
[Energy Saver] key was
pressed.
The display is turned off.
The display is turned off.
158
Causes
The AC power switch has not
been turned on.
Functions other than the copier
function are not yet ready.
Functions appear on the home
screen when they become
ready for use. Time required
varies by function.
Functions other than the copier
function are not yet ready.
Functions appear in the User
Tools menu when they become
ready for use. Time required
varies by function.
In some cases, the machine
does not enter Sleep mode
when the [Energy Saver] key is
pressed.
The machine is in Low Power
mode.
The machine is in Sleep mode.
Solutions
Turn on the AC power switch.
For details about the AC power
switch, see "General
Requirements", Maintenance
and Specifications .
Wait a little longer.
Wait a little longer.
Before you press the [Energy
Saver] key, check that the status
of the machine does not prevent
it from entering Sleep mode. For
details about statuses that inhibit
Sleep mode, see "Saving
Energy", Getting Started
Touch the display panel or press
one of the keys on the control
panel to cancel Low Power
mode.
Press the [Energy Saver] key or
the [Check Status] key to cancel
Sleep mode.
.