Ricoh C220S - Aficio SP Color Laser Administration Manual page 254

• Tray 1: Type
The following paper types are available:
Thin Paper, Plain Paper, Plain Paper 2, Recycled Paper, Color Paper, Letter-
head, Preprinted Paper, Prepunched Paper, Labels, Bond Paper, Cardstock,
Thick Paper, Envelope, Any Type
• Custom Paper Size
You can make the custom paper size settings, when [Custom Paper Size] is se-
lected.
• Unit:
You can specify the unit of measurement in "mm" or "inch".
• Horizontal:
You can specify the horizontal width between 90 and 216 mm.
• Vertical:
You can specify the vertical length between 148 and 356 mm.
• Tray 2: Size
The following sizes are available:
A4 (210 x 297 mm), 8 1/2 x 11
• Tray 2: Type
The following paper types are available:
Thin Paper, Plain Paper, Plain Paper 2, Recycled Paper, Color Paper, Letter-
head, Preprinted Paper, Prepunched Paper
Note
❒ Tray 2 is available only when the optional paper feed unit is attached to the
printer
Adjusting registrations
On the [Maintenance] tab, you can adjust color registration and print starting po-
sitions.
Normally, you do not have to adjust registrations. However, adjustments could
be useful in some cases, especially when you want to print in the correct posi-
tion. Under [Registration: Tray 2 Paper] and [Registration: Bypass Tray], you can adjust
the print image position printed on the sheet fed from each tray. To check the adjust-
ment result, use [Print Test Sheet].
Also, you can updated the firmware by clicking [Printer Firmware Update].
The latest version of the firmware can be downloaded form the supplier's web-
site.
Setting basic functions
On the [System] tab, you can set basic functions required to use the printer. The
printer can be used on factory-set defaults, but the configuration can be changed
depending on the condition of the user. The changed condition holds even if the
printer is turned off.
The access code can be changed on this tab.
Using Smart Organizing Monitor
8
89