Ricoh C220S - Aficio SP Color Laser Administration Manual page 129

Troubleshooting
Images are not printed in the
right position
ASH102S
Images are printed diagonally
to the pages
ASH103S
Vertical line appear.
7
ASH104S
Horizontal lines appear on the
printed paper.
Paper is not fed from the select-
ed tray.
A printed image is different
from the image on the compu-
ter's display.
84
Status
Adjust the printing position from Smart Organizing Moni-
tor.
See Software Guide.
Adjust the front end paper guide and both side paper guides
to match the paper size.
See p.34 "Loading Paper".
The intermediate transfer belt is dirty.
Follow the procedure below to clean the belt:
A
B
C
D
If this procedure does not resolve the problem, contact your
service representative.
• Impact can cause lines to appear on printed paper and
• If lines appear on prints, turn the printer off, wait a few
When you are using the Windows operating system, the
printer driver settings override those set using the control
panel. Set the desired input tray using the printer driver.
See the printer driver Help.
When you use some functions, such as enlargement and re-
duction, the layout of the image might be different from that
displayed in the computer display.
Possible Causes, Descriptions, and Solutions
Open the top cover while the power is on.
Remove all print cartridges from the printer.
Close the top cover with both hands carefully.
The printer enters cleaning mode automatically.
When cleaning finishes, open the top cover and reinsert
all the print cartridges.
other malfunctions.
Protect the printer from impact at all times, especially
while it is printing.
moments, and then turn it back on again. Then, perform
the print job again.