Ricoh C220S - Aficio SP Color Laser Administration Manual page 229

Monitoring and Configuring the Printer
Adjusting registrations
On the [Maintenance] tab, you can adjust color registration and print starting po-
sitions.
Normally, you do not have to adjust registrations. However, adjustments could
be useful in some cases, especially when you want to print in the correct posi-
tion. Under [Registration: Tray 2 Paper] and [Registration: Bypass Tray], you can adjust
the print image position printed on the sheet fed from each tray. To check the adjust-
ment result, use [Print Test Sheet].
Also, you can updated the firmware by clicking [Printer Firmware Update].
The latest version of the firmware can be downloaded form the supplier's website.
Setting basic functions
On the [System] tab, you can set basic functions required to use the printer. The
printer can be used on factory-set defaults, but the configuration can be changed
5
depending on the condition of the user. The changed condition holds even if the
printer is turned off.
The access code can be changed on this tab.
Making network-related settings
On the [Network 1], [Network 2] and [Network 3] tabs, you can set configurations
about network connection and communication.
The following operations are possible on these tabs:
• Checking the machine name, active protocol, and other printer information
• Making interface settings, including timeout period and protocol settings
• Checking or making TCP/IP settings
• Checking or making IPX and SMTP settings
• Checking or making SNMP and AppleTalk settings
Settings conditions for printing
On the [Printer] tab, you can set conditions for printing.
In the [PCL] area, you can specify the conditions such as Orientation and font settings.
In the [PS] area, you can specify Resolution and Color Profile.
64