Kyocera TASKalfa 3051ci User Manual page 87

1.
2.
3.
1.
2.
User Guide
Setting a Character Stamp
Click System Stamp under Management Settings on the navigation menu. The
System Stamp Settings page opens.
To apply a character stamp to a print job, proceed as follow. Select On or Off and click
Settings button.
1. Stamp Settings: Select a type of stamps from the drop-down list. Select Text
Entry to enter a text for the stamp.
2. General: Select the position and pattern for the stamp.
Stamp Method: Select either Each Print Page or Each Original Page to show the
stamp.
Position: Select how the stamp is positioned on the page, from the drop-down list.
Nudge: Nudge the stamp in range of -10 to +10, from right to left or up and down, as
you exactly intend to position on the page.
Back page: Select Mirror Front Page or Same as Front Page as desired.
Display Pattern: From the drop-down list, select Transparent, Clipping, or Over-
write.
Density: Select the transparency of the character stamp, from the drop-down list.
The less the value, the more the stamp becomes transparent.
Rotation: Select Clockwise or Counterclockwise and enter the angle as desired.
3. Form Settings: Select the typography for the characters of the stamp.
Font Type: From the drop-down list, select Courier or Letter Gothic as desired.
Font size: From the drop-down list, select 64.0 pt, 48.0 pt, or 24.0 pt.
Bold: Select either On or Off.
Italic: Select either On or Off.
Color: Select the color for the text from the drop-down list.
Character Border: Select the type of borders for the text from the drop-down list.
Click Submit button. To cancel settings, click Back button.
Creating a Bates Stamp
Click System Stamp under Management Settings on the navigation menu. The
System Stamp Settings page opens.
To serial-number the printed pages, proceed as follow. Select On or Off and click
Settings button.
1. Stamp Settings: Add or delete properties of the stamp for serial numbering as
follows.
Add Stamp: You can add Date, User ID, Serial Number, Numbering, and Text 1
or Text 2 to a stamp.
To remove a stamp, select the stamp on the list and click Delete button.
Date Format: Select a format of date from the drop-down list.
Numbering: Select a number of digits to fix from the Fixed Digit Number drop-
down list. Enter the initial value of the serial number in Numbering Default.
Text: Enter a text in Text 1 or Text 2 for the serial numbered stamp.
2. General: Select the position and pattern for the stamp.
Position: Select how the stamp is positioned on the page, from the drop-down list.
Nudge: Nudge the stamp in range of -10 to +10, from right to left or up and down, as
you exactly intend to position on the page.
Back Page: Select Mirror Front Page or Same as Front Page as desired.
Display Pattern: From the drop-down list, select Transparent, Clipping, or Over-
write.
Density: Select the transparency of the character stamp, from the drop-down list.
The less the value, the more the stamp becomes transparent.
3. Form Settings: Select the typography for the characters of the stamp.
Management Settings
83