Original Settings; Energy Saver/Timer - Kyocera TASKalfa 3051ci User Manual

Paper Detail Settings
1.
2.
3.

Original Settings

Original Auto Detect
1.
2.
3.
Custom Original Size
1.
2.
3.

Energy Saver/Timer

Energy Saver Settings
1.
2.
User Guide
Click Paper/Feed/Output under Device Settings on the navigation menu. The Paper/
Feed/Output Settings page opens.
Click Settings in Paper Detail Settings. The Paper Details Settings page opens.
You can configure the following settings.
Custom Page Size Settings
You can select whether change the size of Custom Paper (On) or not (Off). When
you want to change the settings, enter the length (X) and width (Y) of the Custom
Paper.
Media Type Settings
You can select the paper weight for each media type by clicking the drop-down list.
When you select the Custom 1 to 8, you can select the paper weight as well as
specifying whether or not to use duplex printing and entering the custom paper
name.
After confirming the settings, click Submit button.
This section explains how to configure the original.
Click Original Settings under Device Settings on the navigation menu. The Original
Settings page opens.
This setting specifies the auto detection of the original. You can select A6 or Hagaki for
A6/Hagaki and On (auto detection) or Off for Folio and 11 x 15".
After confirming the settings, click Submit button.
Click Original Settings under Device Settings on the navigation menu. The Original
Settings page opens.
Select On or Off for each Custom Original (1 to 4). When you want to change the
settings, enter the length (X) and width (Y) of the Custom Paper.
After confirming the settings, click Submit button.
This section explains how to configure the Energy Saver Settings and Timer Settings.
Click Energy Saver/Timer under Device Settings on the navigation menu. The Energy
Saver/Timer Settings page opens.
You can configure the following settings.
Device Settings
23