Kyocera TASKalfa 3051ci User Manual page 34

Function Settings
3.
Default Output Settings
1.
2.
30
Continuous Scan (Fax)
Activates or deactivates Continuous Scan for fax.
Border Erase
Set the width of the outer and inner borders to erase in 0 to 50mm. You can set bor-
der erase for the reverse side.
Prevent Bleed-through (Copy)
Activate or deactivate Prevent Bleed-through for copying.
Prevent Bleed-through (Send/Store)
Activate or deactivate Prevent Bleed-through for sending and storing.
Click Submit button.
Click Common/Job Defaults under Function Settings on the navigation menu. The
Common/Job Default Settings page opens.
You can make changes for the following items as required.
EcoPrint
Switches EcoPrint On or Off to control toner consumption for saving the printing
costs. The default setting is Off. When selecting On, you can select Toner Save
Level from 1 (Low) to 5 (High).
Margin
You increase or decrease the top and left gutters from -18 to +18mm.
JPEG/TIFF Print
This determines the physical size of JPEG images when printing them from a USB
flash device. Choices include Fit to Paper Size, Image Resolution, and Fit to
Print Resolution.
XPS Fit to Page
This determines the page size for printing XPS data. Turn On to fit print data over
the page size and turn Off to print in the original size.
Collate/Offset
Select the default collate/offset settings. When Collate is set to On, the documents
are collated by copy (Offset is set to Each Set). When Collate is set to Off, the
documents are collated by page (Offset is set to Off).
FAX TX Resolution
This selects the resolution to fax a document.
E-mail Template
This allows to create a template for entering a subject and body information of E-
mail. Up to three templates can be created and configured with the default settings.
Embedded Web Server