Smtp Protocol; E-Mail - Kyocera TASKalfa 3051ci User Manual

E-mail

SMTP protocol

1.
2.
3.
User Guide
This section includes advanced settings for E-mail.
Click E-mail under Function Settings on the navigation menu. The E-mail Settings
page opens.
You can make changes for the following items as required.
SMTP Protocol
Display whether a SMTP connection is available or not. Configure SMTP in SMTP
(E-mail TX) on the Protocols Settings page.
SMTP Server Name
Enter the SMTP server name or its IP address. If entering the name, rather than the
IP address, a DNS server address must also be configured. The DNS server
address may be entered on the TCP/IP Settings page.
SMTP Port Number
Set the SMTP Port Number or use the SMTP default port 25. The default port num-
ber for SMTP connections over SSL is 465.
SMTP Server Timeout
Sets the timeout in seconds during which this device tries to connect to the SMTP
server.
Authentication Protocol
Enables or disables the SMTP authentication protocol or sets POP before SMTP as
the authentication type. When selecting On or POP before SMTP, you can select
user on the drop-down list.
SMTP Security
Displays SMTP Security. This item appears when SSL/TLS or STARTTLS is
selected on SMTP Security of the Protocol Settings page.
POP before SMTP Timeout
Sets the timeout in seconds during which this device tries to connect to the POP3
server. You can configure this item when you selected POP before SMTP as
Authentication Protocol.
Connection Test
Tests to confirm that the settings on this page are correct. When Test button is
clicked, this machine tries to connect to the SMTP server.
Domain Restriction
Activate or deactivate to restrict domains. Click Domain List button to configure.
Enter a domain name that is permitted or rejected. You can also specify the E-mail
addresses.
Click Submit button.
Function Settings
35