Supported Microcontroller Series - Fujitsu FLASH-CAN-100 User Manual

3 Supported Microcontroller Series

The target board was designed to work with many microcontrollers from the F²MC-16LX
family. As it allows the programming of blank flash devices and supports high speed CAN
interfaces, this board is ideal as a test at design start. The following microcontroller series
can be used with this board:
< MB90420G = MB90V420G, MB90F428GA/GB/GC etc.
< MB90435 = MB90V540, MB90F437, MB90F438, MB90F439 etc.
< MB90440G = MB90V440G, MB90F443G etc.
< MB90470* = MB90V470B, MB90F474L, MB90F474H etc.
< MB90480* = MB90V480, MB90F481, MB90F482, MB90F483, etc.
< MB90540G = MB90V540G, MB90F543G/GS, MB90F546G/GS etc.
< MB90550 = MB90V550, MB90F553A, MB90553A, etc.
< MB90580 = MB90V580, MB90F583, MB90583, etc.
< MB90590G = MB90V590G, MB90F594/A/G, MB90594/A/G, MB90591/G, etc.
< MB90595G = MB90V595, MB90F598, MB90598, etc.
* modifications are necessary for FlashCAN100P-M06: see chapter 5.1
UG-900001-32
Change even page title here
Chapter 3 Supported Microcontroller Series
- 8 - © Fujitsu Microelectronics Europe GmbH