Features - Fujitsu FLASH-CAN-100 User Manual

Change odd page title here
Chapter 2 Features

2 Features

< a new 100-pin socket adapter for better connectivity
< 7-14V unstabilized external DC power supply possible
< 5V and 3.7V internal power supply available
< two high-speed CAN drivers
< one RS232 interface
< two identical pin connectors for all MCU pins
< optional sub-clock
< RST, HST push-button
< 8 User-LEDs
< external reset via RS232
< Flash-Programming Software for PC's
The target board will be delivered with the MB90F598G single-CAN, 128KByte flash
microcontroller. This microcontroller contains the 'burn-in'-boot loader for programming the
flash.
© Fujitsu Microelectronics Europe GmbH - 7 - UG-900001-32