Table of Contents
Advertisement
14.Select Interface
1 Press "Next"
the scanner display the Screen 54.
NOTE
The screen 54 will appear oniy when the scannen has proper interface boavds or option boards in the
third party slot.
2 At the Screen 54, press
interface type. Press
change the setting.
NOTICE
Normally, this setting does not have to be changed.
NOTE
When an appropriate board is installed in the third party slot of the scanner, the scanner automatically
turns off the SCSI interface, activating the board in the third party slot. Screen 54 can be used to
forcibly change the selected interface, the selected interface is forcibly changed.
NOTE
The SCSI interface and the board installed in the third party slot cannot be used at the same time.
NOTE
The default is Auto.
3 Press
to return.
7-12
or "Previous"
and let
or
to select
if you want to
<Screen 54>
Advertisement
Table of Contents
