No
Item
12
SCSI terminator
setting
13
Low Power Mode
setting
14
Select Interface
15
Display TPS Board
ID Number
* This offset refers to the difference from the value adjusted by automatic offset adjustment.
** Some restrictions apply to the detection of a double feed.
Description
Select the SCSI terminator ON/OFF.
Change the default setting of the duration
for power save.
Select the interface when the scanner has
a board in the Third Party Slot.
Display the ID number of the board in the
Third Party Slot.
(Continued)
Selectable
Default
parameters
ON/OFF
ON
5min.
15min.
to 60min.
Auto/SCSI/TPS Auto
7-3