Document Quality - Fujitsu C150-E146-02EN Operator's Manual

Image scanner
Table of Contents

Advertisement

Document Quality

This section describes the types and weights of paper that the scanner can read and precautions in
preparing documents to ensure maximal scanner functioning.
Document type
The recommended paper type for document is as follows:
• Woodfree paper
• Plain paper (for example, the paper type specified for XEROX 4024)
When using all other type of paper, test feed a few sheets with the ADF to ensure the paper feeds properly
before performing a large-scale reading operation.
Any paper can be used or the flatbed. However, grand color specification must satisfy the specification
described in the section of Grounding Color Area.
Paper weight
The paper weight should fall within the following ranges:
2
• 52 to 127 g/m
(13.9 to 34 lb), 127g/m
Precautions
The following documents may be difficult to read properly by ADF. A preliminary document feed test may
be necessary to avoid unexpected errors. If document slip or jam in the ADF (JAM error) or double feed
occurs frequently, read the documents manually by flatbed.
• Paper with clips or staples.
• Paper with wet ink.
• Paper of which thickness is not constantly equal. (like envelope)
• Paper with large rumples or curls. (See NOTE on the next page.)
• Paper with folds or tears.
• Tracing paper.
• Coated paper (for example, some paper used for color printing).
• Carbon paper.
• Paper smaller than A8 (Portrait) size, or larger than A3 or Double Letter.
• Materials other than paper (for example, clothes, metal foil, or OHP film).
• Photographic paper.
• Paper with notches on its side.
• Non-rectangular paper.
• Very thin paper.
4-2
2
(34lb) for A8

Advertisement

Table of Contents
loading

This manual is also suitable for:

M4097d

Table of Contents