Display Panel Bracket; Replacing The Display Cable - Dell Inspiron Mini 1012 Service Manual

1 display cable
7. Gently peel off the display cable from the display panel.

Replacing the Display Cable

1. Follow the procedures in Before You
2. Adhere the display cable along the edge of the display panel and connect the display cable to the connector on the display panel.
3. Replace the tape that secures the display cable to the display panel.
4. Turn the display panel over and place it on the display cover.
5. Replace the display panel (see
6. Replace the display bezel (see
7. Replace the display assembly
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Display Panel Bracket
Removing the Display Panel Bracket
1. Follow the procedures in Before You
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display panel (see
5. Remove the four screws (two on each side) that secure the display panel brackets to the display panel.
6. Remove the display panel brackets off the display panel.
Begin.
Replacing the Display Panel).
Replacing the Display Bezel).
(Replacing the Display Assembly).
Begin.
Removing the Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).