Download Print this page

Dell Inspiron Mini 1012 Service Manual: Replacing The Display Panel; Display Cable; Removing The Display Cable

Service manual.
Hide thumbs

Advertisement

1
screws (4)
2
 

Replacing the Display Panel

 
1. Follow the procedures in
Before You
 
2. Align the display panel with the display cover
 
3. Connect the camera cable to the connector on the camera module.
 
4. Replace the four screws that secure the display panel to the display cover.
 
5. Replace the display bezel (see
 
6. Replace the display assembly (see
 
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
 Display Cable
 

Removing the Display Cable

 
1. Follow the procedures in
Before You
 
2. Remove the display assembly (see
 
3. Remove the display bezel (see
 
4. Remove the display panel (see
 
5. Turn the display panel over and place it on a clean surface.
 
6. Pull the pull-tab as shown in the illustration to disconnect the display cable from the connector on the display panel.
display panel
Begin.
Replacing the Display
Bezel).
Replacing the Display
Assembly).
Begin.
Removing the Display
Assembly).
Removing the Display
Bezel).
Removing the Display
Panel).

Advertisement

   Also See for Dell Inspiron Mini 1012

   Related Manuals for Dell Inspiron Mini 1012

Comments to this Manuals

Symbols: 0
Latest comments: