Replacing The Display Assembly - Dell Inspiron Mini 1012 Service Manual

NOTE: Ensure that you take adequate care while opening the display.
9. Note the routing of the Mini-Card antenna cables and remove them from the routing guides on the computer.
10. Disconnect the antenna cables from the Mini-Card.
11. Disconnect the display cable from the connector on the system board.
12. Remove the display cable grounding screw.
1 Mini-Card cable routing
3 display cable grounding screw
13. Remove the screw that secures the display assembly to the computer base.
1 screw
14. Lift the display assembly off the computer.

Replacing the Display Assembly

2 display cable connector