Download Print this page

Dell Inspiron Mini 1012 Service Manual: Display Bezel; Removing The Display Bezel

Service manual.
Hide thumbs

Advertisement

 
1. Follow the procedures in
Before You
 
2. Place the display assembly in position and replace the screw that secures the display assembly to the computer base.
 
3. Replace the display cable grounding screw.
 
4. Route the Mini-Card antenna cables through the routing guides on the computer base.
 
5. Connect the display cable to the connector on the system board.
 
6. Connect the antenna cables to the Mini-Card (see
 
7. Replace the screw that secures the display assembly to the computer base.
 
8. Replace the hinge cover (see
 
9. Replace the palm rest assembly (see
 
10. Replace the hard-drive assembly (see
 
11. Replace the keyboard (see
 
12. Replace the battery (see
Replacing the
 
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
 Display Bezel
 

Removing the Display Bezel

 
CAUTION:
The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
 
1. Follow the procedures in
Before You
 
2. Remove the display assembly (see
 
3. Remove the two rubber pads that cover the screws that secure the display bezel to the display cover.
 
4. Remove the two screws that secure the display bezel to the display assembly.
 
5. Using your fingertips, carefully pry up the inside edge of the display bezel.
1
screws (2)
3

display bezel

Begin.
Replacing the
Replacing the Hinge
Cover).
Replacing the Palm Rest
Replacing the Hard-Drive
Replacing the
Keyboard).
Battery).
Begin.
Removing the Display
Assembly).
2
rubber pads (2)
Mini-Card(s)).
Assembly).
Assembly).

Advertisement

   Also See for Dell Inspiron Mini 1012

   Related Manuals for Dell Inspiron Mini 1012

Comments to this Manuals

Symbols: 0
Latest comments: