6
Connect flat cables.
•
When connecting an IDE-compliant internal option
The connector of the secondary IDE cable, which is marked "To the motherboard" in the
figure below, is connected to the secondary IDE connector in the PC unit.
< Secondary IDE cable (40 pins)>
Pin 1 Red line
To the
motherboard
Connect components as follows to the master and slave connectors:
CD-ROM only
Hard disk + CD-ROM
Magneto-optical disk + CD-ROM
SLAVE
Connect the option here
to configure it as a slave.
Magneto-optical disk
MASTER
Connect the option here to
configure it as the master.
Master
CD-ROM
Hard disk
Slave
—
CD-ROM
CD-ROM
53