Fujitsu 8000 SERIES User Manual page 25

4 Connect the mouse.
With the mark on the connector of the mouse cable facing right, plug the mouse connector to the
back of the PC unit as indicated by the mouse label color on the back.
5 Connect the display cable to the PC unit.
Connect the display cable connector to the display connector on the back of the PC unit and tighten
the cable connector screws.
If you have not set up Windows, proceed to "Connecting the power cable".
Connecting a LAN cable before making Windows setup may result in an error during setup.
The LAN cable must, therefore, be connected after you have completed the setup.
6 Connect the LAN cable.
Connect the connector on the other end of the twisted pair cable to the LAN connector on the
back of the PC unit.
7 Connect the LAN cable.
Connect the connector on one end of the twisted pair cable (to be purchased separately) to a
network connector such as a hub unit.
15