Inserting Or Removing Cd - Fujitsu 8000 SERIES User Manual

Inserting or Removing CD

Inserting a CD
1 Press the eject button.
This ejects the tray to mount a CD.
2 With the label side of the CD facing upward, put the CD in the center of the tray.
3 Press the eject button.
The tray enters the unit to load the CD.
Point
• The BUSY lamp lights up when the CD is loaded. Proceed to the following operation after making
sure that the BUSY lamp turns off.
Removing the CD
Confirm that the Busy lamp is off, then press the Eject button to remove the CD.
24
Eject button