Inserting Or Removing A Cd - Fujitsu DESKPOWER C600 Series User Manual

Inserting or Removing a CD

Inserting a CD
1 Press the CD eject button.
Press the middle of the CD eject button, and the CD tray pops out.
2 Pull the tray out with a hand.
As shown in the figure, hold the center of the tray.
3 Mount the CD by facing its label to the left, and push the CD until it snaps onto the hub
at the center of the tray.
When pressing the CD, hold the tray not to tip over the PC.
Label side
Point
Be sure to press the CD until it snaps onto the hub at the center of the tray. Otherwise, a fault may
occur.
CD access lamp
CD eject button
Tray
Hub
41