Process Detailed In Document - Dell PowerConnect W-Airwave User Manual

Process Detailed in Document

1. Setup and Tuning the VisualRF Service – enabling the service and ensure the proper performance
characteristics
2. Configure QuickView Personal Preferences – configure RF toggles
3. Creating Campuses and Buildings – each floor must be associated with a building and campus
4. Importing a Floor Plan – the Floor Plan Importation Wizard walks through several steps
Background image importation
Image cropping
Image sizing
Assign image properties: floor number, name, number of grid cell size, and other floor plan
information
Note: support for all versions of CAD (dwg, dxf, and dwf) files versions 1999 – 2010.
5. Provisioning Existing Access Points onto Floor Plan – drag and drop
6. Increasing Accuracy -- Dell only recommends drawing interior walls for planning purposes.
Drawing Walls – only need to incorporate exterior walls, because VisualRF will
automatically calculate interior Path Loss.
Client Training for Stationary Devices – used for desktop or other stationary wireless
devices
Remote Client Surveys – the ability to remotely survey the RF environment via any
wireless client connected to the network. Provides additional RF inputs for low-coverage
areas.
Fine Tuning Location Service – grid cell size and deviation variation
Ensure RF Data Frequency – configuring AMP and the infrastructure to provide timely RF
statistics
AP placement for capacity versus location accuracy
7. Viewing Floor Plans and Utilizing QuickView
User View
AP View
Floor Plan View
Network
Tree View
8. Pre-deployment Provisioning and Planning
Manually provision access points onto floor plan
Automatically provision access points onto floor plan
Replicate floor plan vertically
Print BOM report
Export campus
Import exported campus
Match access points
10
Campus Build View
Visual RF an d Visual RF Plan | User Guide