Dell PowerConnect W-Airwave User Manual page 29

Figure 24. "Add Static Training"
To remove a statically trained device, left-click on the client, and select the Surveys and Training
5.
option
Click on the "Delete" button for Static Training
6.
Figure 25. "Remove Static Training"
Add Client Surveys
Client surveys provide a method for increasing the accuracy of the attenuation grid by taking real signal
samplings from client devices associated with the WLAN. Key differentiators of Dell's client surveys
are: (1) they utilize readings from the access points and not the client and (2) they utilize numerous
samples. This produces a more accurate representation because signals obtained from the client's card
(what signal a client hears the AP) can vary from vendor to vendor. The signal-levels at which APs can
hear a client are already normalized. Utilizing multiple samples alleviates spikes or troughs than come
from utilizing a single sample.
1. Left-click and hold client device that you want to utilize for the survey.
2. Move to proper location and release left mouse button. A popup menu will appear.
Figure 26. "Client Surveys"
3. Select Surveys and Location option
Visual RF and Visual RF Plan | User Guide P 29