Profiles > Rf > 802.11A/G Radio > Ht Radio; Profiles > Rf > 802.11A/G Radio > Spectrum - Dell PowerConnect W-Airwave Configuration Manual

Profiles > RF > 802.11a/g Radio > HT Radio
Perform these steps to create or edit High Throughput (HT) Radio profiles.
1. Select Profiles > RF > HT Radio in the Navigation pane.
2. Select the Add button to create a new HT Radio profile, or click the pencil icon to edit an existing profile.
Complete the settings as described in
Table 55
Field
General Settings
Folder
Name
Other Settings
40 MHz Intolerance
Honor 40MHz
Intolerance
Legacy Station
Workaround
3. Select Add or Save. The added or edited profile appears on the Profiles > RF > HT Radio page.
Profiles > RF > 802.11a/g Radio > Spectrum
NOTE: This profile depends on the controller having an RF protect license and a minimum version of 6.0.0.0
Perform these steps to create or edit Spectrum profiles.
1. Select Profiles > RF > Spectrum in the Navigation pane.
2. Select the Add button to create a new Spectrum profile, or click the pencil icon to edit an existing profile.
Complete the settings as described in
Table 56
Field
General Settings
Name
114 | Configuration Reference
Profiles > RF > HT Radio Profile Settings
Default Description
Top Set the folder with which the profile is associated. The drop-down menu displays all folders
available for association with the profile.
Blank Enter the name of the profile.
No Allows a radio using this profile to stop using the 40 MHz channels if the 40 MHz intolerance
indication is received from another AP or station.
Yes Select 40 MHz intolerance if you want to enable 40 MHz intolerance. This
parameter controls whether or not APs using this high-throughput profile will advertise
intolerance of 40 MHz operation. By default, this option is disabled and 40 MHz operation is
allowed.
No Use this setting to allow or disallow associations from legacy (non-HT) stations.
Profiles > RF > Spectrum Profile Settings
Default
Blank
Table 55:
Table 56:
Description
Enter the name of the profile.
Dell PowerConnect W-AirWave 7.5 | Configuration Guide