Dell PowerConnect W-Airwave Configuration Manual page 91

Table 37
Predefined IDS DoS Profiles (Continued)
Parameter
AP Flood Threshold
AP Flood Increase Time
AP Flood Detection Quiet Time
Detect EAP Rate Anomaly
EAP Rate Threshold
EAP Rate Time Interval
EAP Rate Quiet Time
Detect Rate Anomalies
Detect 802.11n 40 MHz
Intolerance Setting
Client 40 MHz Intolerance
Detection Quiet Time
Rate Thresholds for Assoc
Frames
Rate Thresholds for Disassoc
Frames
Rate Thresholds for Deauth
Frames
Rate Thresholds for Probe
Request Frames
Rate Thresholds for Probe
Response Frames
default
Perform these steps to configure or edit an IDS Denial of Service profile, and to create or edit profiles that are
referenced by a DOC profile.
1. Select Profiles > IDS > Denial of Service in the Dell PowerConnect W Navigation pane.
2. Select the Add button to create a new Signature Matching profile, or click the pencil icon next to an existing
profile to edit. Complete the settings as described in
Table 38
Field
General Settings
Folder
Name
Dell PowerConnect W-AirWave 7.5 | Configuration Guide
ids-dosdisabled ids-dos-lowsetting
50 50
3 seconds 3 seconds
900 seconds 900 seconds
disabled disabled
60 60
3 seconds 3 seconds
900 seconds 900 seconds
disabled disabled
disabled enabled
900 seconds 900 seconds
default default
default default
default default
default probe-request-response-
thresholds
default probe-request- probe-request-response-
response-thresholds thresholds
default default
Profiles > IDS > Denial of Service Profile Settings
Default Description
Top Set the folder with which the profile is associated. The drop-down menu displays all
folders available for association with the profile.
Blank Enter the name of the profile.
ids-dosmedium-setting
50
3 seconds
900 seconds
enabled
30
3 seconds
900 seconds
disabled
enabled
900 seconds
default
default
default
probe-request-response-
thresholds
probe-request-response-
thresholds
default
Table 38:
ids-dos-highsetting
50
3 seconds
900 seconds
enabled
60
3 seconds
900 seconds
enabled
enabled
900 seconds
default
default
default
probe-request-response-
thresholds
Rate Thresholds for Auth
Frames
Configuration Reference | 85