Dell 5330dn Workgroup Mono Laser Printer User Manual page 21

PCL
This menu sets the PCL emulation configuration. You can set the font type, symbol type, lines per page, and font size.
Menu selection: Purpose:
PCL Sets the PCL emulation
configuration: font type, symbol
type, lines per page, and font
size.
PostScript
This menu provides you with the Print PS Error menu item.
Menu selection: Purpose:
PostScript Provides the Print PS Error
menu items.
Accessing Operator Panel Menus
1. Press Menu ( ).
2. Press Scroll ( to ) to highlight the desired setting and press Select (
3. If the setting item has sub menus, repeat step 2.
4. Press Scroll ( to ) to access the required value.
5. Press Select ( ) to save the selection.
6. If you want to move to the upper level menus, press Select (
7. Press Cancel ( ) to return to Standby mode.
Values:
Typeface Select the standard font to be
used in PCL emulation.
PCL1 ~ PCL56
PCL1~PCL7's interval
l
between letters is fixed,
and PCL8~PCL45's interval
is proportional to the font
type and font size. Adjust
the font size of PCL1~PCL7
using the Pitch item, and
PCL8~PCL45 using the
Point Size item.
PCL46~PCL56's interval
l
and font size are fixed.
Symbol Selects the symbol set to be used
in PCL emulation. The symbol set
is the group of numbers, marks,
ROMAN8 ~ OCR B
and special signs used when
printing letters. Available symbol
sets vary depending on the
Typeface setting.
Point Size By selecting between PCL8 and
PCL45 from the Typeface menu,
you can determine the font size
4.00 ~ 999.75
by setting the height of the
(0.25 unit)
characters in the font.
Courier Select the version of Courier font
to use.
Regular, Dark
Pitch By selecting between PCL1 and
PCL7 from the Typeface menu,
you can determine the font size
0.44 ~ 99.99
by setting the number of
(0.01 unit)
characters that will print in one
horizontal inch of type. The
default value 10 is the best size.
Lines Set vertical spacing from 5 to 128
lines for the default paper size.
The default number of lines may
5 ~ 128
differ according to the paper size
and printing orientation.
Values:
Print PS Error Select whether or not your
printer prints an error list when a
PS error occurs.
On
On: Prints PS 3 emulation
l
Off
errors. If an error occurs,
the job stops processing,
the error message prints,
and the printer flushes the
job.
Off: The job is flushed
l
without an indication of
any error.
).
).