Ports Configuration - Dell 5330dn Workgroup Mono Laser Printer User Manual

You can use the following printer control buttons:
Refresh: renews the available printers list.
l
Add Printer: allows you to add a new printer.
l
Remove Printer: removes the selected printer.
l
Set as Default: sets the current printer as a default printer.
l
Stop/Start: stops/starts the printer.
l
Test: allows you to print a test page to check if the machine is working properly.
l
Properties: allows you to view and change the printer properties. For details, see
l
Classes Tab
The Classes tab shows a list of available printer classes.
Refresh: renews the classes list.
l
Add Class...: allows you to add a new printer class.
l
Remove Class: removes the selected printer class.
l

Ports Configuration

In this window, you can view the list of available MFP ports, check the status of each port, and release a port that is stalled in a busy state after its owner has
terminated for any reason.
"Configuring Printer Properties".