This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. This program is
especially for the network administrator to set several network IPs at the same time.
NOTE:
You can only use Set IP Address Utility when your printer is connected to a network.
1. Connect the network cable to your machine.
2. Print the Configuration page of the printer to see the current network configuration and MAC address.
3. Click Start
Programs
4. Click
in the SetIP Address window to open the TCP/IP configuration window.
5. Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.
NOTE:
when you enter the MAC address, enter it without colon(:).