Selecting An Output Location - Dell 5330dn Workgroup Mono Laser Printer User Manual

Dual-web paper
Polyester
Vinyl
Integrated Forms Pressure-sensitive area
(must enter the printer
first)
Paper base (long grain)
Envelopes 25% Cotton Sulfite, wood-free or up
Content Maximum to 25% cotton bonds
Weight- 24 lb
a.Short grain is preferred for papers over 135 g/m

Selecting an Output Location

The printer has two output locations: the output tray (face down) and the rear door (face up).
To use the output tray, ensure that the rear door is closed. To use the rear door, open it.
NOTE: If paper coming out of the output tray has problems, such as excessive curl, try printing to the rear door.
NOTE: To avoid paper jams, do not open or close the rear door while the printer is printing.
Printing to the Output Tray
Output bins available
The following table provides information on standard and optional output bin capability and connectivity.
Output Bin Name Capacity
Rear output Tray
100 sheets of 75 g/m
paper
-
-
-
-
-
-
2
.
Maximum Weight &
Media Type Supported
2 2
Plain paper 60-216 g/m ,
Label, Envelopes,
Cardstock,
Transparencies.
(47 lb bond)
2
176 g/m
(47 lb bond)
2
176 g/m
(47 lb bond)
2
176 g/m
(47 lb bond)
2
135-140 g/m
(36-40 lb bond)
2
75-135 g/m
(20-36 lb bond)
2
75-105 g/m
(20-28 lb)
How Many Can Be
Installed on the Printer?
N/A - One is standard on
the printer and located at
the rear side.