Removing The Camera Module - Dell Inspiron 13 N3010 Service Manual

Back to Contents Page
Camera Module
Dell™ Inspiron™ N3010 Service Manual
Removing the Camera Module
Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Camera Module
1. Follow the instructions in Before You
2. Remove the battery (see Removing the
3. Remove the memory-module cover (see
4. Remove the memory module(s) (see
5. Remove the keyboard (see
6. Remove the palm rest assembly (see
7. Remove the display assembly (see
8. Remove the display bezel (see
9. Remove the display panel (see
10. Remove the two screws that secure the camera module to the display cover.
11. Remove the tape that secures the display cable to the connector on the camera module.
12. Disconnect the display cable from the connector on the camera module.
1 screws (2)
3 display cable
Begin.
Battery).
Removing the Memory-Module
Removing the Memory Module(s)).
Removing the Keyboard).
Removing the Palm Rest
Removing the Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).
2 camera module
4 tape
Removing the
Cover).
Assembly).
Battery) before working inside the