Replacing The System Board - Dell Inspiron 13 N3010 Service Manual

1 speaker cable connector
3 screws (3)
14. Remove the three screws that secure the system board assembly to the computer base.
15. Carefully ease the connectors on the system board assembly out of the slots in the computer base, and lift the system board assembly out of the
computer base.
16. Turn the system board assembly over.
17. Remove the hard-drive assembly (see
18. Remove the processor heat sink (see
19. Remove the processor module (see
20. Remove the coin-cell battery (see
21. Remove the Mini-Card (see
Replacing the System Board
1. Follow the instructions in Before You
2. Replace the Mini-Card (see
3. Replace the coin-cell battery (see
4. Replace the processor module (see
5. Replace the processor heat sink (see
6. Replace the hard-drive assembly (see
7. Align the connectors on the system board assembly with the slots on the computer base and place it on the computer base.
8. Replace the three screws that secure the system board assembly to the computer base.
9. Connect the speaker cable to the connector on the system board.
10. Replace the VGA connector board (see
11. Replace the middle cover (see
12. Replace the processor heat sink fan (see
13. Replace the display assembly (see
2 system board assembly
Removing the Hard Drive).
Removing the Processor Heat
Removing the Processor Module).
Removing the Coin-Cell Battery).
Removing the Mini-Card).
Begin.
Replacing the Mini-Card).
Replacing the Coin-Cell Battery).
Replacing the Processor Module).
Replacing the Processor Heat
Replacing the Hard Drive).
Replacing the VGA Connector
Replacing the Middle Cover).
Replacing the Processor Heat Sink
Replacing the Display Assembly).
Sink).
Sink).
Board).
Fan).