Display Hinges; Replacing The Display Cable; Removing The Display Hinges - Dell Inspiron 13 N3010 Service Manual

1 display cable 2

Replacing the Display Cable

1. Follow the instructions in Before You
2. Connect the display cable to the connector on the display panel and replace the tape that secures the display cable to the display panel.
3. Replace the camera module (see
4. Turn the display panel over and place it on the display cover.
5. Replace the display panel (see
6. Replace the display bezel (see
7. Replace the display assembly
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Display Hinges

Removing the Display Hinges

1. Follow the instructions in Before You
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display panel (see
5. Push the hinge cap tabs to release it from the display hinge.
display cable connector
Begin.
Replacing the Camera Module).
Replacing the Display Panel).
Replacing the Display Bezel).
(Replacing the Display Assembly).
Begin.
Removing the Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).