Dell Inspiron 13 N3010 Service Manual page 48

2. Place the VGA connector board on the computer base and replace the two screws that secure the VGA connector board to the computer base.
3. Slide the VGA connector cable into the connector on the system board and press down on the connector latch to secure the cable.
4. Replace the middle cover (see
5. Replace the display assembly (see
6. Replace the palm rest assembly (see
7. Replace the keyboard (see
8. Replace the memory module(s) (see
9. Replace the memory-module cover (see
10. Replace the battery (see Replacing the
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Replacing the Middle Cover).
Replacing the Display Assembly).
Replacing the Palm Rest
Replacing the Keyboard).
Replacing the Memory Module(s)).
Replacing the Memory-Module
Battery).
Assembly).
Cover).