Entering The Service Tag In The Bios - Dell Inspiron 13 N3010 Service Manual

Service manual
Hide thumbs Also See for Inspiron 13 N3010:
Table of Contents

Advertisement

 
®
14. Replace the Bluetooth
card (see
 
15. Replace the palm rest assembly (see
 
16. Replace the keyboard (see
 
17. Replace the memory module(s) (see
 
18. Replace the memory-module cover (see
 
19. Replace the battery (see
Replacing the
 
20. Replace any cards or blank that you removed from the 7-in-1 Media Card Reader slot.
 
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
 
21. Turn on the computer.
NOTE:
After you have replaced the system board, enter the computer Service Tag in the BIOS of the replacement system board.
 
22. Enter the service tag (see
Entering the Service Tag in the
 Entering the Service Tag in the BIOS
 
1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
 
2. Turn on the computer.
 
3. Press <F2> during POST to enter the system setup program.
 
4. Navigate to the security tab and enter the service tag in the Set Service Tag field.
Back to Contents Page
 
Replacing the Bluetooth
Module).
Replacing the Palm Rest
Replacing the
Keyboard).
Replacing the Memory
Module(s)).
Replacing the Memory-Module
Battery).
BIOS).
Assembly).
Cover).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron n3010

Table of Contents