(4) Disconnect the panel-hook SW harness from the hook sensor PCB and take it out from the
cable guides.
(5) Push the right-hand arm of the control panel ASSY inwards with your finger and open the
control panel ASSY further. Then lift up the control panel ASSY.
Reassembling Notes
• Route the panel-hook SW harness together with the hook SW-main harness through the two
cable guides provided on the scanner drive unit, as illustrated in Subsection 4.1.26, "Harness
routing B."
• When installing the handset mount, first fit the two tabs provided at the upper section into the
top cover and then snap the handset mount into place, taking care not to let it hold down the
hook switch.
4 -1 3