Panel Rear Cover And Control Panel - Brother FAX 2800 - B/W Laser - Fax Service Manual

4.1.5 Panel Rear Cover and Control Panel

(1) Place the control panel ASSY upside down.
If you do not need to remove the ADF parts, pinch rollers and their related parts, anti-static
brush, or document rear sensor actuator, skip to step (6).
(2) To remove the ADF parts (spring plates and separation rubber), remove the screw.
(3) To remove the pinch rollers and their related parts, press the lock arm to the rear and shift the
pinch roller shaft to the left.
(4) To replace the anti-static brush, remove it.
NOTE: Once removed, the anti-static brush will become unusable and a new part will have to
be put back in.
(5) To remove the document rear sensor actuator, pull support "c" outwards.
(6) Pull support "a" to the front to release the center tab of the document pressure bar. Next pull
either of supports "b" outwards and lift up the document pressure bar. The spring also comes
off.
4 -1 4