32
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Align the connectors on the I/O board with the slots on the computer base and gently
press down on the I/O board.
2
Replace the screws that secure the I/O board to the computer base.
3
Slide the I/O board cable into the connector on the system board and press down on
the connector latch to secure the cable.
Postrequisites
1
Follow the instructions from step 2 to step 5 in Replacing the Palm Rest.
2
Replace the dispaly assembly. See "Replacing the Display Assembly" on page 48.
3
Replace the macro keyboard. See "Replacing the Macro Keyboard" on page 38.
4
Replace the keyboard. See "Replacing the Keyboard" on page 35.
5
Replace the center control cover. See "Replacing the Center Control Cover" on
page 29.
6
Replace the base cover. See "Replacing the Base Cover" on page 15.
7
Replace the battery pack. See "Replacing the Battery Pack" on page 13.
8
Replace any cards or blank that you removed from the Media-Card Reader.
9
Follow the instructions in "After Working Inside Your Computer" on page 11.
62
|
Replacing the I/O Board
Replacing the I/O Board
Before working inside your computer, read the safety