Removing The Palm Rest Assembly; Prerequsites - Alienware M17x R4 Owner's Manual

37
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.

Prerequsites

1 Remove any installed card or blank from the 9-in-1 Media Card Reader.
2 Remove the battery pack. See "Removing the Battery Pack" on page 12.
3 Remove the compartment door. See "Removing the Compartment Door" on page 14.
4 Remove the screws that secure the palm rest assembly to the computer base.
1 screws (5)
5 Remove the center control cover. See "Removing the Center Control Cover" on
page 41.
6 Remove the keyboard. See "Removing the Keyboard" on page 45.
64
|

Removing the Palm Rest Assembly

Removing the Palm Rest
Assembly
Before working inside your computer, read the safety
1