Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Alienware P51E Service Manual

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the memory module.
4. Remove the M.2 2230 solid-state drive
5. Remove the M.2 2280 solid state drive
6. Remove the small fan.
7. Remove the top heat-sink.
8. Remove the wireless card.
9. Remove the rear-I/O
10. Remove the battery.
11. Remove the speakers.
12. Remove the power-adapter
13. Remove the touchpad.
14. Remove the antennas
15. Remove the display assembly.
16. Remove the keyboard-controller
17. Follow the procedure from step 1 to step 16 in
NOTE: The system board can be removed and installed along with the audio board, USB Type-C board, and heat sink-
assembly. This simplifies the removal and installation procedure and avoids breaking the thermal bond between the system
board and heat sink.
18. Remove the power button.
About this task
The following image(s) indicate the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
74
Before working inside your
in slot three and four.
or M.2 2230 solid-state drive
cover.
port.
board.
Removing the system
computer.
in slot one and two, whichever applicable.
board.